Montgomery County, IN Insulation Payback
Attic insulation payback for Montgomery County, IN
DOE classifies Montgomery County as climate zone 5, cold — a real winter that drives most of the annual energy bill here. Its recommended attic R-value for bare joists is R-60. Topping up a typical 1,000-square-foot attic from bare joists (R-2) to R-60 runs an estimated $3,480, and saves about $1,745 a year in heating and cooling — a payback around 2 years. Hard to find a home improvement with a faster payback than this.
The breakdown behind the number
Of that, about $1,622/year comes from reduced heating and $123/year from reduced cooling load through the ceiling. Montgomery County beats 69% of the counties in this 3,162-county dataset on estimated insulation savings. Among the 745 counties DOE places in zone 5, Montgomery County ranks 398th. Against Indiana's own average of $1,634/year, Montgomery County runs 7% above that.
The climate data behind this
Montgomery County's climate figures — 6,067 heating and 767 cooling degree days a year — are read from CRAWFORDSVILLE 6 SE, IN US, 5.5 miles away, NOAA's nearest 1991-2020 normals station. That combined heating-and-cooling load ranks Montgomery County 1013th nationally by total degree days — the 68th percentile. DOE also classifies Montgomery County as moisture regime A (humid) - ask a local contractor whether that changes the vapor-barrier approach for this job.
The smaller top-up scenario
A shallower starting point changes the math: with R-11 already down, only the gap to R-49 needs filling, at roughly $2,280 for an estimated $255/year saved (~9-year payback). It is close - the payback only just fits a reasonable timeframe.
Next steps for a Montgomery County attic
Real bids depend on how easy the attic is to reach and whether old insulation needs removing first, so treat $3,480 as a starting estimate for a Montgomery County job, not a quote. Expect at least a $600 minimum charge from most contractors.
More on how this was built
Nothing here is a guess: the methodology guide names the DOE climate map and NOAA station data behind every number on this page. See the DIY vs. contractor guide for whether a job this size is realistic to do yourself.